Laserfiche WebLink
Crawford,Murphy&Tilly <br /> William Street Pump Station,E.Main Street&S.29th Street, Decaur, IL <br /> October 6,2022/IDEAL Number 25115 <br /> General Definitions <br /> Asbestos Containing Material (ACM): Material containing greater than 1%asbestos as determined by Polarized Light <br /> Microscopy (PLM). [Refer also to General Comments paragraph about qualitative analysis.] <br /> Homogeneous Area:An area of material that appears uniform in texture,size, color and apparent or known date of <br /> installation. <br /> Area ID/Sample Area&Sample ID: The alpha-numeric code given to each sampled homogenous area and each sample <br /> taken. <br /> Area Name&Area Description:The name and a description of each homogenous area. <br /> Area Estimate:The estimated quantity of accessible material.Additional quantities may be present in inaccessible areas. <br /> Area Location: The area location as noted in written text and on diagram(s) (if provided) may be a general description and <br /> may not include all locations. <br /> Friable Material:Any material that,when dry, can be crumbled, pulverized,or reduced to powder by hand pressure. <br /> ENon-Friable Material:Any material that,when dry,cannot be crumbled,pulverized, or reduced to powder by hand pressure. <br /> Non-Friable Organically Bound Material (NOB): Material where the asbestos (if present)is tightly bound to the matrix <br /> material (generally asphalt-or vinyl-based). Examples include flooring, mastics, caulks, and roofing materials. <br /> Category I Non-Friable ACM: Non-friable asbestos containing packing,gaskets, resilient floor covering and asphalt roofing <br /> products. <br /> Category II Non-Friable ACM: Non-friable asbestos containing materials other than Category I. <br /> Poor Condition:The binding of the material is losing its integrity as indicated by peeling, cracking, or crumbling of the material. <br /> All materials in poor condition are Regulated Asbestos Containing Materials (RACM). <br /> Surfacing Material: Material that is sprayed-on,troweled-on or otherwise applied to surfaces, such as acoustical plaster on <br /> ceilings,fireproofing materials on structural members, or other materials on surfaces for acoustical,fireproofing, and other <br /> purposes. <br /> Thermal System Insulation (TSI): Insulation applied to pipes,fittings, boilers, breeching,tanks, ducts and other structural <br /> components to prevent heat loss or gain. <br /> Miscellaneous Material:Any material not classified as surfacing or TSI. <br /> Condition of Material:The condition of a material is classified into three categories. <br /> Not Damaged—Material that has<I%localized or distributed damage as determined by an asbestos inspector(aka <br /> good condition). <br /> Damaged—Material that has 1-25%localized damage or 1-10%distributed damage as determined by an asbestos <br /> inspector. <br /> Significantly Damaged—Material that has>25% localized damage or>10%distributed damage as determined by an <br /> asbestos inspector. <br /> Response Action: Identifies appropriate remediation for a material. A response action is assigned by an asbestos <br /> management planner. In schools, it is required for all thermal system insulation materials and for all friable surfacing and <br /> miscellaneous materials. <br /> O&M: Operations and maintenance <br /> Regulated Asbestos Containing Material (RACM): 1). Friable ACM.2).Category I non-friable ACM that has become friable. <br /> 3). Category I non-friable ACM that will be or has been subjected to sanding,grinding,cutting, abrading or pulverized. <br /> 4). Category II non-friable ACM that has a high probability of becoming or has become crumbled, pulverized,or reduced to <br /> powder by the forces expected to act on the material during demolition operations. <br /> [Materials may be reported as regulated ACM if qualitative analysis indicates that asbestos is present,even though it is not quantified.] <br /> Trace Amounts of Asbestos:According to laboratory results, sample found to contain less than or equal to I%asbestos. <br /> lot Ideal Environmental Engineering,Inc. (305;828-42�i) www.idealenvironmental.com <br /> Page 113 <br />