R2014-94 AGREEMENT WITH BAINBRIDGE, GEE, MILANSKI AND ASSOCIATES, INC.

Home Browse Search

1 f sufficient to permit the construction contractor("Contractor")to construct the improvement within the construction tolerances established in the Project specifications. In addition,the number of control points shall be consistent with standard engineering practice. 2. Replacement of Lost Control Points. Control points which are lost, damaged,removed or otherwise moved by the Contractor or others shall be promptly replaced by the Consulting Engineer or Surveyor and costs for such replacement shall be computed on a time and materials basis,and reimbursed by the City or its construction contractor. 3. Accuracy. The Consulting Engineer or Surveyor shall provide the horizontal and vertical control points within the same measurement tolerances as the construction tolerances established in the Project specifications. The Consulting Engineer or Surveyor shall be responsible for the accuracy of the control points which are established. The Consulting Engineer or Surveyor shall be responsible for costs which may result from errors by the Consulting Engineer or Surveyor in placement of control points. The Consulting Engineer or Surveyor shall take all reasonable and customary actions to protect the control points established by the Consulting Engineer or Surveyor. 4. Completion Time. The Construction Survey and Layout Phase shall be completed within the time period set forth in Exhibit C,Project Timeline. D. CONSTRUCTION INSPECTION PHASE, The Consulting Engineer shall, after written authorization to proceed with the Construction Inspection Phase: 1. General Duties. The Consulting Engineer shall consult with and advise the City's Representative and act as its representative as provided herein and in the General Conditions of the construction contract for the Project. The primary responsibility of the Consulting Engineer in this phase of the work shall be quality control inspection of the materials,construction methods and techniques to assure that the Contractor builds the project in accordance with the plans and specifications. 2. Construction Inspection and Reporting. The Consulting Engineer shall make visits to the site at intervals appropriate to the various stages of construction to observe as an experienced and qualified design professional the progress and quality of the executed work of the Contractor and to determine in general if such work is proceeding in accordance with the Contract Documents. During such visits and on the basis of on-site observations,the Consulting Engineer shall keep the City's Representative informed of the progress of the work, shall endeavor to guard the City against defects and deficiencies in such work and may disapprove or reject work failing to conform to the Contract Documents. Fefmalnetion of the pr-egfess of` ef!E shall be in the . Project schedule updates shall be submitted to the City's Representative in writing. 3. Review of Technical and Procedural Aspects. The Consulting Engineer shall review and approve (or take other appropriate action in respect to Shop Drawings,the results of tests and inspections and other data which each Contractor is required to submit, determine the acceptability of substitute materials and equipment proposed by the Contractor(s),and receive and review(for general content as required by the Specifications)maintenance and operating instructions, schedules, guarantees,bonds and certificates of inspection which are to be assembled by the Contractor(s). Last Revised:05/15/2013