R2014-94 AGREEMENT WITH BAINBRIDGE, GEE, MILANSKI AND ASSOCIATES, INC.

Home Browse Search

drawings need not detail changes in measurements, elevation lines or grades which are within the normally accepted construction tolerances. Record drawings may be prepared using AutoCAD or other electronic plan preparation method. Alternately,record drawings may be prepared using manual methods. The plans shall be delivered to the City's Representative in the form of one set of prints and electronic file if record drawings were prepared by electronic methods. The cost of document reproduction shall be considered to be a reimbursable expense and paid in accordance with Section V(C)of this agreement. 14. Completion Time. The Consulting Engineer shall complete the Construction Inspection Phase within the time period set forth in Exhibit C,Project Timeline. SECTION III. CITY'S RESPONSIBILITIES The City shall, A. FURNISH REQUIREMENTS AND LIMITATIONS. Provide all criteria and full information as to the City's requirements for the Project,including design objectives and constraints, space, capacity and performance requirements, flexibility and expandability,economic parameters and any budgetary limitations; and furnish copies of all design and construction standards which the City will require to be included in the Drawings and Specifications. B. FURNISH INFORMATION. Assist the Consulting Engineer by placing at the Consulting Engineer's disposal all available information pertinent to the Project including previous reports and any other data relative to design or construction of the Project. C. FURNISH TECHNICAL INFORMATION. Furnish to the Consulting Engineer, as required for performance of the Consulting Engineer's Basic Services(except to the extent provided otherwise in Exhibit A, "Scope of Work"), data prepared by or services of others, including without limitation, core borings,probings and subsurface explorations,hydrographic surveys,laboratory tests and inspections of samples,materials and equipment; appropriate professional interpretations of all of the foregoing; environmental assessment and impact statements;property,boundary, easement,right-of- way,topographic and utility surveys;property descriptions; zoning, deed and other land use restriction; all of which the Consulting Engineer may rely upon in performing the Consulting Engineer's services. D. SURVEYS AND REFERENCE POINTS. Provide field control surveys and establish reference points and base lines except to the extent provided otherwise in Section II to enable the Contractor(s) to proceed with the layout of the work. E. ACCESS TO PROPERTY. Arrange for access to and make all provisions for the Consulting Engineer to enter upon public and private property as required for the Consulting Engineer to perform the Consulting Engineer's services. F. REVIEW DOCUMENTS. Examine all studies,reports, sketches, drawings, specifications, proposals and other documents presented by the Consulting Engineer,obtain advice of an attorney, insurance counselor and other consultants as the City's Representative deems appropriate for such examination and render in writing decisions pertaining thereto within a reasonable time so as not to delay the services of the Consulting Engineer. G. OBTAIN APPROVALS AND PERMITS. Furnish approvals and permits from all governmental authorities having jurisdiction over the Project and such approvals and consents from others as may be necessary for completion of the Project. Last Revised:05/15/2013