Laserfiche WebLink
Chapter 68 <br /> upon which a violation occurs or is allowed to continue, or a condition is not brought into <br /> compliance after notice, shall be viewed and shall be prosecuted as a separate and distinct <br /> offense. <br /> 12. OTHER REMEDIES. The imposition of the penalties herein prescribed shall not <br /> preclude the institution of appropriate action to prevent unlawful construction or to restrain, <br /> correct or abate a violation or to stop an illegal act, conduct, business or operation of mechanical <br /> equipment or systems in or about any premises. <br /> 13. RE-INSPECTION FEES. A re-inspection fee of$30.00 shall be assessed against <br /> the applicant for a construction permit, or in the case of a combined permit, against the licensed <br /> subcontractor, who has requested an inspection which cannot be completed and/or approved by <br /> the Inspection Division for any of the following reasons: (1) The work for which the inspection <br /> has been requested is not installed or completed to the extent that an inspection can be made; (2) <br /> The inspection reveals that the mechanical system has code violations due to: Mechanical <br /> equipment and appliances not being installed in accordance with manufacturer's installation <br /> instructions for the labeled equipment; or (3) the work for which the inspection has been <br /> requested has been covered up or hidden from view so that an inspection cannot be made. <br /> If an inspection can be made, but 3 or fewer items are found which need correction to <br /> fully comply with the Mechanical Code, the permit applicant or licensed subcontractor shall be <br /> notified in writing by the Inspection Division of the corrections required, and a re-inspection fee <br /> of$30.00 shall be assessed against the permit applicant or licensed subcontractor only when any <br /> subsequently requested inspection reveals that any of the previously noted code violations have <br /> not been corrected. (AMENDED, Ordinance No. 2000-26, April 17, 2000) <br />