Laserfiche WebLink
b. Maximum Area: Ten (10)percent of the facade or wall on which the sign(s) is/are <br /> attached, or one (1) square foot per linear foot of occupant frontage, whichever is <br /> larger. <br /> c. Illumination: A wall sign may be illuminated but non-flashing if located a minimum <br /> of 25 feet from any residential side or rear lot line <br /> d. A wall sign may not extend above the top of the wall where displayed. <br /> 5. Permit-Exempt Signs <br /> a. Temporary freestanding signs may not exceed ten (10) feet in height and thirty- <br /> two (32) square feet in area. Only one (1) sign is allowed per lot. <br /> b. Extended temporary signs may not exceed three (3) feet in height and six (6) <br /> square feet in area. Only one (1) sign is allowed per lot. <br /> c. Temporary wall signs or banners may only be attached to the main building. A <br /> total of three (3)temporary wall signs or banners will be allowed on the main <br /> building and when combined with the permanent wall signs may not exceed <br /> fifteen (15) percent of the wall on which it is located. <br /> (Amended, Ordinance No. 2005-105, December 19, 2005) <br /> 6. Projecting yard signs. Projecting yard signs not exceeding 40 square feet plus one <br /> additional square foot for each additional foot of occupant frontage over 40 feet are <br /> allowed, subject to the following: <br /> a. In the B-4 District <br /> In the B-4 District, a combination of projecting yard signs and wall signs are permitted, <br /> subject to the area limitations for projecting yard signs and wall signs as noted above. <br /> b. All other districts. <br /> In all other business and industrial districts, on a property where there are no freestanding <br /> signs and no wall signs, one projecting yard sign may be attached to the building <br /> 7. Rooftop signs. In the B-4 District, a building consisting of three (3) stories or more may <br /> erect a rooftop sign, provided that: <br /> a. The total height of the sign above the roof deck, coping line or parapet wall does not <br /> exceed 20 feet, provided that the combined height of the building and sign do not <br /> exceed the maximum height for a structure within the B-4 District; <br /> b. The width of the sign does not exceed one-third (1/3) of the width of the building face <br /> at the top of the building on the side on which the sign faces; and; <br /> c. The maximum area of the sign does not exceed 300 square feet. <br /> 8. Signs in the M-3 District. Only the following signs are permitted in the M-3 District: <br /> a. Wall signs: One (1) sign is permitted, which may not exceed 25 square feet in area. <br />