R2003-92 ACCEPTING BID - Laserfiche WebLink

Home Browse Search

SPECIFICA�IONS FOR REPLACEMENT GARAGE DOORS Bidder shall complete every space in the Bidder's Proposal Column by placing an "X" to indicate that the item will be furnished exactly as specified or by giving a description of the item, on a separate sheet if necessary, to indicate any deviation of an item being bid from the stated specification. Any features appearinD in the manufacturer's regular, published specifications and/ or brochures are assumed to be included in the Bidder's Proposal. Any additions, deletions or variations from these published specifications must be explained in full. 1. GENERAL All items and their installation shall meet 1. � all Federal, state and local laws and reb lations, including electrical/construction codes. 2. SITE Installation will include the removal and 2. � PREPARATION disposal of the eight (8) existing doors, motors; opening mechanisms, brackets and hangers, control panels, hardware, etc. 3. DOORS The eight(8)replacement garage doors,motors, opening mechanisms, brackets and hangers, control panels, hardware, etc. shall meet or exceed the following specifications: (a.)Each door shall be a tracked, sectional, overhead type garage door measuring approximately 22'2"wide by 13'4" tall. The successful bidder shall be responsible for making the exact measurements to properly fit the doors. �a,� � 5e�e �i�c��J p��M' (b.) The doors, motors, opening mechanisms, �� brackets and hangers, control panels, hardware, etc. shall all be designed for � heavy duty, industrial use. (b,� (c.) The doors shall be constructed of light weight materials, covered with metal inside and outside, and fully insulated. (c.) (d.) Motors to raise and lower the doors shall operate on a 440 volt/3 phase electrical power source, OR LESS. (The existing motors operate on 440 volt/3 phase / electrical power.) �d,� ` Decatur Public Transit System A[tachment A -,q2- Technical SpeciScations