Laserfiche WebLink
Page 2B-6 December 2000 <br /> Guidance: <br /> The Expressway and Freeway sizes should be used for higher-speed applications to <br /> provide larger signs for increased visibility and recognition. <br /> Option: <br /> The Minimum size may be used on low-speed roadways where reduced legend size would <br /> be adequate for the regulation or where physical conditions preclude the use of the other sizes. li <br /> The Oversized size may be used for those special applications that require increased � <br /> emphasis,unproved recognition,or increased legibility. <br /> Section 2B.04 STOP Sign (Rl-1) <br /> Standard: <br /> When a sign is used to indicate that traffic is always required to stop, a STOP <br /> (Rl-1) sign shall be used. <br /> The STOP sign shall be an octagon with a white legend and border on a red <br /> background. Secondary legends shall not be used on STOP sign faces. If <br /> appropriate,a supplemental plaque(Rl-3 or Rl-4) shall be used to display a <br /> secondary legend. Such plaques shall have a wtute legend and border on a red <br /> background. If the number of approach legs controllerl by STOP signs at an <br /> intersection is three or more,the numeral on the supplemental plaque,if used, shall <br /> correspond to the actual number of legs controlled by STOP signs. <br /> At intersections where a11 �pproaches are controlled by STOP signs (see Section <br /> 2B.07), a supplemental plaque(Rl-3 or Rl-4) shall be mounted below each STOP <br /> sign. <br /> Option: <br /> The ALL WAY(Ri-4)supplemental plaque may be used instead of the 4-WAY(Rl-3) <br /> supplemental plaque. <br /> Support: <br /> The design and application of Stop Beacons are described in Section 4K.05. <br /> Sect.2B.03 to 26.04 <br />