Laserfiche WebLink
i <br /> 1. Surface preparation: Remove all existing <br /> asphaltic coating, loose annealing oxide, loose rust, <br /> and other loose detrimental foreign matter by power <br /> tool cleaning meeting NAPF 500-03-03 Power Tool <br /> ' Cleaning. Chemical paint stripper may be used if <br /> required to completely remove the asphaltic coating. <br /> 2. Prime Coat: A <br /> ' 3. Topcoat: A <br /> B. New ductile iron flanged adapter and restraining <br /> ' gland. <br /> 1. Surface preparation: Clean and abrade surface of <br /> factory applied epoxy coating as required by <br /> ' manufacturer of new coating. <br /> 2. Intermediate Coat: A <br /> 3. Topcoat: A <br /> ' Spec Section ADD the attached Asbestos Inspection Report after the end of <br /> 6 40 05 53 Valves Section 40 05 53. The report is reference in Par. 3.01.A. <br /> ' END OF ADDENDUM NUMBER 01 <br /> Decatur V TF/16011-01 2 of 2 Addendum No. 03 <br />