Laserfiche WebLink
FRONTLINE <br /> COMMUNICATIONS Decatur Police Department <br /> aDivision M//an AOna6cfafny(M OaMaoh Copaatao Manion Crisis Negotiation Vehicle Proposal <br /> In addition to these connections, the following connections will be provided in the panel: <br /> • Not Required,Audio Connections/Controls <br /> • Port replicator USB-C <br /> • Not Required, Fiber Connection <br /> • Not Required, Phone Connections <br /> • 120VAC Duplex with USB-A <br /> • Not Required, Radio/Antenna Connections <br /> TRAINING, ELECTRONICS SYSTEMS <br /> One day of electronics systems training at the manufacturer's site will be provided. <br /> ADDITIONAL EQUIPMENT <br /> Two (2) extinguishers, 5 pound, Halotron Fire Extiguishers will be provided - one in the cab and <br /> one in the body. <br /> PAINT PROCESS <br /> The exterior custom cab and/or body painting procedure will consist of a seven (7) step finishing <br /> process. A commercial chassis paint process will follow similar processes as determined by the <br /> chassis manufacturer. The following procedure will be used by Pierce: <br /> 1. Manual Surface Preparation -All exposed metal surfaces on the custom cab and body will <br /> be thoroughly cleaned and prepared for painting. Imperfections on the exterior surfaces <br /> will be removed and sanded to a smooth finish. Exterior seams will be sealed before <br /> painting. Exterior surfaces that will not be painted include; chrome plating, polished <br /> stainless steel, anodized aluminum and bright aluminum treadplate. <br /> 2. Chemical Cleaning and Pretreatment - All surfaces will be chemically cleaned to remove <br /> dirt, oil, grease, and metal oxides to ensure the subsequent coatings bond well. The <br /> aluminum surfaces will be properly cleaned and treated using a high pressure, high <br /> temperature 4 step Acid Etch process. The steel and stainless surfaces will be properly <br /> cleaned and treated using a high temperature 3 step process specifically designed for steel <br /> or stainless. The chemical treatment converts the metal surface to a passive condition to <br /> help prevent corrosion. A final pure water rinse will be applied to all metal surfaces. <br /> 3. Surfacer Primer-The Surfacer Primer will be applied to a chemically treated metal surface <br /> to provide a strong corrosion protective base coat. A minimum thickness of 2 mils of <br /> Surfacer Primer is applied to surfaces that require a critical aesthetic finish. The surfacer <br /> primer will be a two-component high solids urethane that has excellent sanding properties <br /> and an extra smooth finish when sanded. <br /> Bid#253 Page 25 Printed: 5/11/2026 <br />