Laserfiche WebLink
FRONTLINE <br /> COMMUNICATIONS Decatur Police Department <br /> A EWAN.WAWA Ab.A�rc7yf An&Mime atAp.rae.w.M., Crisis Negotiation Vehicle Proposal <br /> 4. Finish Sanding- The surfacer primer will be sanded with a fine grit abrasive to achieve an <br /> ultra-smooth finish. This sanding process is critical to produce the smooth mirror like <br /> finish in the topcoat. <br /> 5. Sealer Primer-The sealer primer is applied prior to the base coat in all areas that have not <br /> been previously primed with the surfacer primer. The sealer primer is a two-component <br /> high solids urethane that goes on smooth and provides excellent gloss hold out when top <br /> coated. <br /> 6. Base coat Paint - Two coats of a high performance, two component high solids <br /> polyurethane base coat will be applied. The Base coat will be applied to a thickness that <br /> will achieve the proper color match. The Base coat will be used in conjunction with a <br /> urethane clear coat to provide protection from the environment. <br /> 7. Clear Coat-Two (2)coats of clear coat will be applied over the base coat color. The clear <br /> coat is a two-component high solids urethane that provides superior gloss and durability to <br /> the exterior surfaces. Lap style doors will be clear coated to match the body. Paint <br /> warranty for the roll-up doors will be provided by the roll-up door manufacturer. <br /> Our specifications are written to define cyclic corrosion testing, physical strengths, durability and <br /> minimum appearance requirements must be met in order for an exterior paint finish to be <br /> considered acceptable as a quality finish. <br /> Each batch of base coat color will be checked for a proper match before painting of the cab and <br /> the body. After the cab and body are painted,the color is verified again to make sure that it matches <br /> the color standard. Electronic color measuring equipment will be used to compare the color sample <br /> to the color standard entered into the computer. Color specifications are used to determine the <br /> color match. A Delta E reading will be used to determine a good color match within each family <br /> color. <br /> All removable items such as brackets, compartment doors, door hinges, and trim will be removed <br /> and separately if required,to ensure paint behind all mounted items. Body assemblies that cannot <br /> be finish painted after assembly will be finish painted before assembly. <br /> Environmental Impact <br /> Contractor will meet or exceed all current State regulations concerning paint operations. Pollution <br /> control will include measures to protect the atmosphere, water and soil. Controls will include the <br /> following conditions: <br /> • Topcoats and primers will be chrome and lead free. <br /> • Metal treatment chemicals will be chrome free. The wastewater generated in the metal <br /> treatment process will be treated on-site to remove any other heavy metals. <br /> Bid#253 Page 26 Printed: 5/11/2026 <br />