R2012-116 ACCEPTING THE BID AND AUTHORIZING CONTRACT

Home Browse Search

GENERAL CONDITIONS GC-2 CLEAN UP The Contractor shall at all times keep the premises free from accumulations of surplus excavated material,waste material or rubbish caused by their employees or work. Upon completion of the work, the Contractor shall remove all their rubbish from and about the structures, buildings, and premises, also all their tools, equipment, scaffolding and surplus materials, and shall leave their work clean, ready for use. In case of dispute, the Owner may remove the rubbish and surplus materials and charge cost of removals to the Contractor or separate contractors, if any, in proportion to amounts determined by the Engineer to be just. GC-3 CONSTRUCTION STAKING The Engineer shall provide basic line and grade staking for construction. Such basic line and grade shall be limited in general to: (1) not more than two base lines (generally perpendicular to each other) and one bench ' mark for a building, a plant site or a major structure; and (2) centerline stakes and offset grade stakes, where applicable, at all changes in direction, manhole location, special structure, or similar critical location, together with bench marks, as may be necessary, along the line of work for utility distribution and transmission lines. Any additional (detailed) construction staking shall be provided by the Contractor, who shall be fully responsible for transfer of data from the basic lines and grades provided by the Engineer. Detailed construction staking shall generally include such items as slope stakes, intermediate centerline stakes, additional offset grade stakes and similar work. The Contractor shall also be responsible for setting of all offsets, lines, string lines, reference points, reference grades, and similar control data required to execute the work under this contract. The Contractor shall furnish all marking paint, stakes, hubs, lath or similar materials necessary for additional (detailed) construction staking, and shall provide manual assistance (rodmen) to assist the Engineer in checking or confirming the detailed staking, to whatever extent the Engineer deems necessary. Such checking, or the absence of it, by the Engineer shall in no way relieve the Contractor from full responsibility for the accuracy and adequacy of the detailed construction staking. All costs of materials and labor occasioned by the Contractor's responsibilities as listed above, shall be borne by the Contractor and shall be included in the respective bid prices of the various items work. 25