Laserfiche WebLink
The Consulting Engineer expressly acknowledges,recognizes and agrees that the only authority to <br /> r approve change orders to this Agreement or the Scope or Services or the cost(s)therein is with the <br /> City Council of the City. <br /> SECTION II. BASIC SERVICES <br /> A. STUDY AND REPORT PHASE. This subsection is not used. <br /> B. PRELIMINARY DESIGN PHASE. This subsection is not used. <br /> C. FINAL DESIGN PHASE. <br /> The Consulting Engineer shall, after written authorization to proceed with the Final Design Phase: <br /> 1. Drawings and Specifications. Utilizing and using the preliminary design documents and <br /> preliminary design opinion of probable Project costs as approved by the City's Representative, <br /> prepare for incorporation in the Contract Documents final drawings to show the character and <br /> extent of the Project("Drawings")and specifications(Specifications") . The Specification shall <br /> consist of Part 3 "Technical Specifications"of the City's standard Capital Improvement <br /> Construction Contract(CICC). Specific requirements of the aforementioned Drawings and <br /> Specifications are included in Exhibit A, Scope of Services. <br /> 2. Approvals of Governmental Entities. Furnish to the City's Representative such documents and <br /> design data as may be required for,and assist in the preparation of,the required documents so <br /> that the City may apply for approvals of such governmental authorities as have jurisdiction over <br /> design criteria applicable to the Project, and assist in obtaining such approvals by participating in <br /> submissions to and negotiations with appropriate authorities. <br /> 3. Adjusted Project Costs. Advise the City's Representative of any adjustments to the latest opinion <br /> of probable Project Costs caused by changes in extent or design requirements of the Project or <br /> construction costs and furnish a revised opinion of probable Project Cost based on the Drawings <br /> and Specifications.Project Costs include construction cost,contingencies,allowances for charges <br /> of all professionals and consultants, allowances for the cost of land and rights-of-way, allowances <br /> for the relocation of utility facilities and equipment if necessary, and allowances for <br /> compensation for damages to properties and interest and financing charges. <br /> 4. Contract Document Preparation. Complete preparation of the construction contract documents by <br /> filling in the necessary information in Parts I, II, and IV of the City's standard CICC. The <br /> Consulting Engineer shall prepare Part 3 "Technical Specification"of the CICC for inclusion in <br /> the standard construction contract. The Consulting Engineer shall not alter the City's standard <br /> contract document without the permission of the City's Representative. The City's <br /> Representative may provide the Consulting Engineer with previously prepared Technical <br /> Specifications which may be used as appropriate. The Consulting Engineer shall,to the <br /> maximum extent possible,follow the formats for Technical Specifications as provided by the <br /> City's Representative. <br /> 5. Document Presentation. Furnish paper copies and digital copies of the completed CICC in the <br /> number and format specified in Exhibit A, Scope of Work and present and review the CICC in <br /> person with the City as the City's Representative shall direct. The cost of document reproduction <br /> shall be considered to be a reimbursable expense and paid in accordance with Section V(C)of <br /> this Agreement. <br />