Laserfiche WebLink
Section 10. Loads Rejected <br /> The Contractor may downgrade any loads received from a Hauler if the load appears to be more <br /> than 10% but less that 30% Residuals. There will be no rebate for downgraded loads. Loads <br /> that appear to have more than 30% residuals will be rejected and disposal charges charged to the <br />� Hauler. <br /> The Contractor shall immediately notify the City's Contract Manager if a load received from one <br /> of the City's authorized Haulers appears to have a non recyclable contamination rate higher than <br /> 30 percent. The City reserves the right to have a representative inspect the load for <br /> contamination. If the City is unable to send a representative to inspect the load, photos shall be <br /> provided to the City via email showing overall load, contaminants and truck number of the load <br /> within 2 hours of the occurrence. The Contractor has the option of keeping the load, if they so <br /> choose. <br /> If recyclable material is rejected at market due to contamination or not fulfilling current market <br /> specifications, the Contractor must obtain approval from the Contract Administrator before <br /> disposing of the residual material in a permitted landfill. <br /> Section 11. Acquisition, Stocking and Distribution of the <br /> Recycling Carts <br /> The Contractor is responsible for acquiring, stocking and distributing the carts to the Haulers for <br /> further distribution to the individual households. <br /> 11.1 Cart specifications <br /> Contractor must use the following minimum specifications while acquiring the carts <br /> 1. Size 64/65 gallon and 34/35 gallon <br /> a. Must be free of sharp edges <br /> b. Shall be stable and self balancing when in upright position either loaded or empty. <br /> c. Handle area shall provide two comfortable gripping areas for pulling and pushing <br /> the cart <br /> d. Integrally molded pick up point on the front side of the cart that allows for semi- <br /> automated or automated lifting. <br /> 2. Must be fitted with UHF, Gen2 RFID tag. <br /> 3. Color: Pepsi Blue; lid may be black <br /> 4. Recycled Content: As much as we could get without compromising the color <br /> 5. In mold Label: Size 8" X 12" (content to be finalized with City Contract Administrator) <br /> 6. White hot stamping on the cart <br /> a. City Logo (8" square) on the front or sides side of the cart; A minimum of 5" for <br /> the smaller carts. <br /> b. Serial Number on the front of the cart <br /> c. Arrows on the top of the cart to show which way the cart should be placed. ' <br /> 7. Instructions on the inside of the lid that talks about maintenance of the cart do's and 'I <br /> don'ts with the cart (content to be finalized with City Contract Administrator). '� <br /> 6 <br />