R2000-221 AUTHORIZING THE EXECUTION OF AN AGREEMENT

Home Browse Search

• `S �i ' K 25. General Conditions—That part of the Contract Documents which sets forth terms, conditions and procedures that govem the Work to be performed or furnished by the Contractor with respect to the Project. 26. Hazardous Environmental Condition—The presence at the Site of Asbestos,PCB's, Petroleum,Hazardous Waste,or Radioactive Materials in such quanrities or circumstances that may present a substantial danger to persons or property exposed thereto in connection with the Work. 27. Hazardous Waste—The term Hazardous Waste shall have the meaning provided in Section 1004 of the Solid Waste Disposal Act(42 USC Section 6903)as amended from time to time. 28. Laws and Regulations;Laws or Regulations—Any and all applicable laws,rules, regulations,ordinances,codes,standards,and orders of any and all governmental bodies, agencies,authorities,and courts having jurisdicrion. 29. PCB's—Polychlorinated biphenyls. 30. Petroleum—Petroleum,including cnzde oil or any fraction thereof which is liquid at standard conditions of temperature and pressure(60 degrees Fahrenheit and 14.7 pound per square inch absolute),such as oil,petroleum,fuel oil,oil sludge,oil refuse,gasoline, kerosene,and oil mixed with other non-Hazardous Waste and crude oils. 31. Radioactive Materials—Source,special nuclear,or byproduct material as defined by the Atomic Energy Act of 1954(42 USC Secrion 2011 et seq.)as amended from time to time. 32. Record Drawings—'The Drawings as issued for construction on which ENGINEER,upon completion of the Work,has shown changes due to Addenda or Change Orders and other informarion which ENGINEER considers significant based on record documents furnished by Contractor to ENGINEER and which were annotated by Contractor to show changes made during construction. 33. Reimbursable Expenses—The expenses incurred d'uectly by ENGINEER in connecrion with the performing or furnishing of Basic and Additional Services for the Project for which OWNER shall pay ENGINEER as indicated in E�chibit C. 34. Resident Project Representative—The authorized representative of ENGINEER,if any, assigned to assist ENGINEER at the Site during the Construcrion Phase. The Resident Project Representarive will be ENGINEER's agent or employee and under ENGINEER's supervision. As used herein,the term Resident Project Representative includes any assistants of Resident Project Representative agreed to by OWNER. The duties and responsibilities of the Resident Project Representative are as set forth in Exhibit D. 35. Samples—Physical examples of materials,equipment or workmanship that are representative of some portion of the Work and which establish the standards by which such portion of the Work will be judged. 36. Shop Drawings—All drawings,diagrams,illustrations,schedules,and other data or information which are specifically prepared or assembled by or for Contractor and submitted by Contractor to ENGINEER to illustrate some portion of the Work. 37. Site—Lands or areas indicated in the Contract Documents as being furnished by OWNER upon which the Work is to be performed,rights-of-way and easements for access thereto, and such other lands furnished by OWNER,which are designated for use of Contractor. 38. Specifications—That part of the Contract Documents consisting of written technical descriptions of materials,equipment,systems,standards,and workmanship as applied to the Work and certain administration details applicable thereto. 39. Substantial Completion—The time at which the Work(or specified part thereo fl has progressed to the point where,in the opinion of ENGINEER,the Work(or a specified Standazd Form of Agreement Between Owner and Engineer for Professional Services 13