Laserfiche WebLink
4 � <br /> City of Decatur Mobile Data System <br /> 3.5.2 Perform an end-taend system acceptance test with the Customer's application. <br /> 3.5.3 Optimize DAT���o equipment as necessary to maximize system performance <br /> based on results of system acceptance tests. <br /> 3.5.4 Make equipment adjustments necessary to optimize system performance. <br /> 3.6 � r ' 'n <br /> 3.6.1 Provide training at either a Customer or Subcontractor location. <br /> 3.6.2 Provide a Vehicular Information Solutions (VIS)Training Manual for each classroom <br /> training participant. <br /> 3.6.3 Provide a sample MRM/radio optimization setup that will include a mobile radio, <br /> MRM,service monitor,NITA,oscilloscope,and cables. <br /> 3.7 E�ui�ment and Materials <br /> 3.7.1 Provide equipment listed on the attached quotation. <br /> 3.7.2 Provide manuals describing the use and maintenance of all DATA1z�,�10-supplied <br /> equipment. <br /> 3.7.3 Provide a complete documentation package for the Customer's system.This <br /> package will include system diagrams,interconnection drawings,parameter lists, <br /> and optimization procedures. <br /> Provide the following test equipment for installation and optimization: <br /> 3.7.4 IFR 1200 service monitor or equivalent <br /> 3.7.5 RF cables and connectors between service monitor and radios <br /> 3.7.6 Oscilloscope and probe <br /> 3.7.7 All components of a DAT.�,xAD�o Starter Kit <br /> 3.7.8 A DOS-based PC-compatible computer with one serial port,a 3.5 inch disk drive, <br /> ' and 640K RAM minimum <br /> 3.7.9 RS-232 cables to connect computers to the NIRMs. <br /> 3.7.10 Installation tools and miscellaneous nuts,bolts,washers,etc.,required to install the <br /> mobile and base hazdwaze <br /> 3.7.11 Cable hangers,hanger adaptors,DC grounding kits,pass-thrus,masts and other <br /> hardwaze required to install coax on the tower and run coax to the radio equipment <br /> �Y�/O' <br /> (Kg,29 Dec 96,rev.a,g.\office\Jwu\decahu\sow3pri.dec) 4 <br />